conical twin screw and barrel

It will require screw drivers of the Philips company, a drill, a panel tool, a kit which bimetallic screw barrel contains amplifier wirings , groomets and spacers made of rubber. Thus take time to do this simple work with care. A hole is drilled in the firewall which is in the compartment of the car engine. This cable gives the connection between the negative lead and the vehicle. Now the cables are placed below the carpeting and our hands are used in the place of the panels. This is done with the help of the instructions given in the manual of the car. Loudness and the clarity of the music talk a lot about the quality of the system we use. It will also require the use of wires and harness adapter. This is used for the power supply of the amplifier. The amplifier is placed in the vehicles trunk. These works must be done with caution and accuracy. The wirings are removed and connected to the harness adapter with the help of plastic binders.

The cables are drawn to the amplifier location.

Technology has made things easy and simple though it is complicated in its own working. In case of trucks it is placed under the seat. This clamps need to be in proper position which will avoid it to be loosened or moved by using ones hand.

Now the ring terminal of the amplifier, whose fuse has been removed, is connected to the positive lead of the battery.

The wires are connected to the speakers from the amplifier. The negative cable of the battery is reconnected. The panel protecting screw barrel the carpeting is removed using a panel tool. The stereo is then connected to the adapter. The codes on the adapter will guide for the connections. The above article would have taught you how to connect an original car stereo to an amp. The stereo is placed on the dashboard of the car. After reading this article you will know how to connect an original car stereo to an amp. The wiring is protected using groomets. It is kept in reach to the wiring.

First of all the negative cable has to be disconnected from the battery. The fuse is inserted in the socket. The cables used for power supply are drawn starting from the battery up to the amplifier. The clamps need to be tightened properly with the help of a screw driver. Music systems have become an essential one for us as it helps us to relax from our pressures. The clamp of the cable is removed using a screw driver . Spacers are used in this case to provide ventilation.

The stereo is removed as per the manual instructions. Then the cables and the leads are connected to amplifier. This ring amplifier is obtained from the kit.It is left undisturbed until the process is completed. A screw driver may be used for this purpose.

The works requires the following tools to proceed. To increase the loudness and clarity of the music we use amplifiers.